POLY MARINE Hypalon and PVC Inflatable Boat Adhesives
Single-part adhesives are good for temporary repairs. For a permanent repair with the maximum of strength, use the two-part products.
Two-Part Hypalon Adhesive
Solvent based polychloroprene rubber adhesive gives high strength bonds when used in conjunction with 3695 curing agent; particularly suitable for repair of inflatable boats.
- Includes: 250ml can of 2990 Adhesive, 10ml bottle of 3965 Curative
- Will bond: Natural rubber, poly- chloroprene, butyl, nitrile , hypalon and polyurethane rubber materials and leather
- Pot Life: 3-4 hours
- Curing Time: Contact bonds in 10-15 minutes, full cure 48 hours
- Coverage: Using two coats, 1 liter bonds 1 square meter
- Apply With: Brush or roller
Single-Part Hypalon Adhesive
Solvent based polychloroprene rubber glue giving high strength bonds, particularly suitable for emergency repair of inflatable boats, RIBs and Dinghies
- Includes: 70ml tube
- Will bond: Natural rubber, polychloroprene, butyl, nitrile , hypalon and polyurethane rubber materials, leather
- Pot Life: 3-4 hours
- Curing Time: Contact bonds in 10-15 minutes, full cure 48 hours
- Coverage: Using two coats, 1 liter bonds 1 square meter
- Apply With: Brush or roller
Two-Part PVC Adhesive
Solvent based polyurethane adhesive giving excellent adhesion to both plasticized and unplasticized PVC. Used in conjunction with 3695 curing agent will bond a wide variety of surfaces including PVC, nylon fabric, polyurethane fabric and foam. Easy to mix two-part supplied in sets with required amount of curing agent. Can be used as a single part for quick temporary repairs. Easy to apply with a stiff, cut down brush Note: For a complete bond 2903 solvent must be used before the adhesive is applied.
- Includes: 250ml can of 3026 Adhesive, 10ml bottle of 3965 Curative
- Will bond: PVC inflatables including Zodiac/Bombard “Dynalon” and “Strongon” fabrics and Narwhal/Valiant “Hypertex”
- Pot Life: 3-4 hours
- Curing Time: Contact bonds in 10-15 minutes, full cure 48 hours
- Coverage: Using two coats, 1 liter bonds 1 square meter
- Apply With: Brush or roller
Single-Part PVC Adhesive
Solvent based polyurethane adhesive giving excellent adhesion to both plasticized and unplasticized PVC nylon fabric, polyurethane fabric and foam. Note: For a complete bond 2903 solvent must be used before the adhesive is applied.
- Includes: 70ml tube
- Will bond: PVC inflatables including Zodiac/Bombard “Dynalon” and “Strongon” fabrics and Narwhal/Valiant “Hypertex”
- Pot Life: 3-4 hours
- Curing Time: Contact bonds in 10-15 minutes, full cure 48 hours
- Coverage: Using two coats, 1 liter bonds 1 square meter
- Apply With: Brush or roller